Daewoo IC Forklifts Phoenix

Inspect a Forklift

There are over 10,000 workplace injuries connected to forklifts occur every year, according to HRSDC and OSHA reports. A lot of these mishaps are caused by driver error. Lack of appropriate equipment maintenance and inspection results in many others. Forklift maintenance and operation is not just the cause of personal injuries, but also of damage to property. Forklifts could damage sprinklers, building structures and overhead pipes, and other equipment when operated incorrectly. The following day by day inspections should be carried out in order to lessen the likelihood of forklift mishaps.



Before checking different fluid levels turn the engine off. Check these fluids: hydraulic oil, fuel, engine oil, brake fluid and coolant. The tires also have to be checked for signs of wear and tear. Check the air pressure in the tires. Check the forks' condition. The load backrest should be firmly attached. Do a visual inspection of the top-clip retaining heel and pin. Afterward carry out an inspection of the hydraulic hoses, mast chains, cables and stops. Make sure that the overhead and finger guards are attached firmly.



The LP fueled forklift has propane tanks that need to be inspected for damage, rust or corrosion. The battery's electrolyte levels and charge need to be tested every so often. Seat belts need to be inspected for wear and tear. Check to make sure the owner's manual is stored on-board the forklift inside a storage compartment. Check the seat belt to make sure the latches are secure. Test the hood latch to ensure it is working as it should.



To make sure there are no unusual engine sounds, start the engine up and listen for any irregularities. If there are, investigate promptly. Check the steering controls and the accelerator. The service brake and the parking break must be properly functioning.



To guarantee proper functioning in both forward and reverse, the tilt control and drive control should be inspected. The functioning of the lowering control, the hoist and attachment control needs periodic checking. Test the lights and horn. Afterward check the defroster, wipers and heater to make certain they are functioning well. Check each gauge to ascertain that it is reading within functional limits.

• CAT Telehandler Phoenix
  There are 5 key steps to making certain that safety is a main concern. The first step is completing a Walk-Around Inspection in order to insure that the unit is visually safe. After that assess... More
• Yale High Capacity Forklifts Phoenix
  The busiest areas of any warehouse are the receiving and shipping areas. Since the docks are really crowded, trucks are designed to be maneuverable, compact and have great visibility. Operators of lift trucks who are... More
• Cat Big Forklifts Phoenix
  For years, Cat has been a leader in equipment, machinery, and tools. When your company has material handling needs, Cat is a world renowned, dependable business known for high quality customer service and product support.... More
• Jungheinrich End Control Forklifts Phoenix
  The lift truck is a very important machinery to help workers raise and move heavy weight supplies and products with speed and efficiency without straining their bodies. The way a company makes use of this... More
• Komatsu Counterbalance Forklift Phoenix
  Counterbalance lift truck Training The Occupational Safety and Health Administration or OSHA require that anyone utilizing a counterbalanced lift truck receive lecture style or classroom training. They also require that a periodic refresher training in... More